2. Operation Mode
LSI Related
Advanced menu
Advanced Chipset Configuration
Operation mode
Parameter
When
applied
Description
QPI Frequency Limit [Auto]
6.4 GT/s
7.2 GT/s
8.0 GT/s
At next boot Specify the upper limit of QPI Link speed.
Auto: Works at highest link speed.
6.4GT/s: Works at 6.4GT/s.
7.2GT/s: Works at 7.2GT/s.
8.0GT/s: Works at 8.0GT/s.
VT-d Disabled
[Enabled]
At next boot
Enable or disable Intel(R) Virtualization
Technology for Directed I/O feature which is the
I/O virtualation technology.This item is displayed
only when the installed processor supports this
feature. This option is inaccessible when Intel
TXT Support is set to Enabled.
Disabled: Disables the feature.
Enabled: Enables the feature.
I/OAT [Disabled]
Enabled
At next boot Enable or disable Intel(R) I/O Acceleration
feature which is the technology developed by
Intel to improve I/O performance, reliability, and
efficiency of network and storage.
Enabled: Enables the feature.
Disabled: Disables the feature.
SR IOV Support [Disabled]
Enabled
At next boot Enable or disable the Single Root I/O
Virtualization feature that supports virtualization
at PCI device side.
Enabled: Enables the feature.
Disabled: Disables the feature.
Wake On LAN/PME Disabled
[Enabled]
At next boot Enable or disable remote power on feature via
network.
Disabled: Disables the feature.
Enabled: Enables the feature.
Storage Related
Advanced menu
Storage Configuration
Operation mode
Parameter
When
applied
Description
SATA Mode Disabled
[IDE Mode]
AHCI Mode
At next boot Specify the SATA mode.
Disabled: Disables the feature.
IDE Mode: Uses SATA device in IDE emulation
mode.
AHCI Mode: Uses SATA device in AHCI mode.
USB Related
Advanced menu
USB Configuration
Operation mode
Parameter
When
applied
Description
Device Reset Timeout 10 sec
[20 sec]
30 sec
At next boot Specify the timeout time when Start Unit
command is issued to USB Mass Storage
Device.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
481
To Next Page
Loading...