NEC express5800 A2010b - Page 483

2. Operation Mode
Chapter 4 Appendix
Security Related (Others)
Security menu
Operation mode
Parameter
([ ]: Default setting)
When
applied
Description
Password on Boot [Disabled]
Enabled
At next boot Enable or disable the feature to request
password entry on boot. This item is accessible
when Administorator Password has been set.
Disabled: Disables the feature.
Enabled: Enables the feature.
Disable USB Ports [Disabled]
Front
Rear
Internal
Front+ Rear
Front+ Internal
Rear+ Internal
Front + Rear + Internal
At next boot Specify the USB port to be disabled.
If internal USB port is disabled, Internal Flash
Memory cannot be used.
Disabled: All the USB ports are available.
Front: The USB port at front of chassis cannot be
used.
Rear: The USB port at rear of chassis cannot be
used.
Internal: The internal USB port cannot be used.
Front + Rear: The USB ports at front and rear of
chassis cannot be used.
Front + Internal: The USB port at front of chassis
and the internal USB port cannot be used.
Rear + Internal: The USB port at rear of chassis
and the internal USB port cannot be used.
Front + Rear + Internal: All the USB ports are
unavailable.
Remote KM and
VMedia
Disabled
[Enabled]
At next boot Enable or disable remote keyboard, remote
mouse, and virtual media feature that BMC
supports.
Disabled: Disables the feature.
Enabled: Enables the feature.
Server Related
Server menu
Operation mode
Parameter
([ ]: Default setting)
When
applied
Description
POST Monitoring Disabled
[Enabled]
At next boot Monitors POST execution to complete. If timeout
error occurs, turn off DC power of the server.
Disabled: Does not monitor POST execution time
to complete.
Enabled: Monitors POST execution time to
complete.
Boot Monitoring [Disabled]
Enabled
1- 60 minutes
(Default: [1] minute)
At next boot Enable or disable the boot monitoring feature.
Use this feature on the OS environment where
NEC ESMPRO Agent is installed.
Set to [Disabled] if NEC ESMPRO Agent is not
installed.
OpROM Monitoring [Disabled]
Enabled
At next boot Enable or disable timeout monitoring feature of
OpROM stall.
Disabled: Disables the feature.
Enabled: Enables the feature.
Express5800/A1040b, A2040b, A2020b, A2010b User's Guide
483