CHAPTER 3 SYSTEM DATA PROGRAMMING
– 201 – NWA-008853-001 Rev.3.0
97ch3003.fm
DESCRIPTION DATA
Invalidate the data setting of Centralized Bill-
ing-CCIS used for Local Office.
(1)
(2)
XX31: Send detail information of C.O. out-
going calls to SMDR
XX : 00-15 (Station Class No. assigned
by CMD015)
0: Not sent
(1)
(2)
XX32: Send detail information of Tie Line
outgoing calls to SMDR
XX : 00-15 (Station Class No. assigned
by CMD015)
0: Not sent
(1)
(2)
XX58: Send detail information of C.O./Tie
Line incoming calls to SMDR
XX : 00-15 (Station Class No. assigned
by CMD015)
0: Not sent
Assign the originating office number, if re-
quired.
(1)
(2)
55
X-XXXX: Originating Office No. NOTE
Assign the billing office number, if required.
NOTE: If using a leading digits of 0 and 0 is
required to print at the SMDR termi-
nal, assign “A” for each leading 0
to be printed.
If the leading digits 0 is not required
to print at the SMDR terminal, as-
sign “0”.
(1)
(2)
56
X-XXXX: Billing Office No. NOTE
C
CMD016
CMD004
END
CENTRALIZED BILLING-CCIS
To Next Page