CHAPTER 3 SYSTEM DATA PROGRAMMING
– 203 – NWA-008853-001 Rev.3.0
97ch3003.fm
DESCRIPTION DATA
Provide the system with Centralized Billing-
CCIS for Center Office.
(1)
(2)
368
0: To provide
Not provide the system with Centralized Bill-
ing-CCIS for Local Office.
(1)
(2)
378
1: Not provided
Assign the second data to 1 (Distant end is a
Local Office) to each CCIS channel.
•
(1)
(2)
Y=03
0-7: CCIS channel No.
1: Distant end is Local Office
Assign the originating office number, if re-
quired.
(1)
(2)
55
0-9999: Originating Office No.
Assign the billing office number, if required. (1)
(2)
56
0-9999: Billing Office No.
Specify the direction for sending of billing in-
formation from the Local Office.
(1)
(2)
239
1: SMDR terminal 0
2: SMDR terminal 1
Specify the SMDR Message Format of billing
information for SMDR with AP00.
[Series 3400 software required]
•
(1)
(2)
Y=01
09
00 : Extended NEAX 2400 IMS Format
15 : Former NEAX 2400 IMS Format
Provide the direction of billing information
which received from Local Office.
[Series 3400 software required]
(1)
(2)
06
3 : PN-AP00-B/PN-AP00-D with MRCA
program
Specify PN-AP00-B/PN-AP00-D with MRCA
program as the destination to send an MP call
information.
[Series 3400 software required]
(1)
(2)
03
2: PN-AP00-B/PN-AP00-D with MRCA
program
A
CM08
INITIAL
CMA7
CMDD03
CMDD01
CM04
B
JULY/01/2006
CENTRALIZED BILLING-CCIS
To Next Page