CHAPTER 3 SYSTEM DATA PROGRAMMING
– 253 – NWA-008853-001 Rev.3.0
97ch3004.fm
Operating Procedure
For Centralized MAT for 2400 IPX, refer to associated document of Centralized MAT for 2400 IPX.
For Centralized MAT for 2000 IPS, refer to Centralized MAT User Guide.
DESCRIPTION DATA
Specify the external alarm kind which is auto-
matically sent.
•
(1)
(2)
Y=3
00-02: External Alarm Kind set by CMEA
Y=2
0: Send
1: Not sent
Specify the contents which is sent to the Inte-
grated Maintenance office as external alarm
kind.
•
(1)
(2)
Y=4
01: Kind of Information Transferred
2: External Alarm Kind
Specify the Point Code of the office, which the
fault information is sent to.
•
(1)
(2)
Y=4
05: Destination office’s point code to which
the fault information transferred
1-16367: Point Code
Assign the name of own office. •
(1)
(2)
Y=5
01: With Character Codes
20-7F: Character Code
(Maximum 32 digits, 16 characters)
(See CM77 in the Command Manual.)
(1)
(2)
02: With Characters
XX...XX: Office name
(Maximum 16 characters)
A
CMEA
END
CENTRALIZED MAT-CCIS
To Next Page
Loading...
