NEC SL1100 - Page 219

NEC SL1100 Issue 6.0
Networking Manual 10 - 7
84-19-08
SIP Extension CODEC
Information Basic Setup –
G.729 Voice Activity
Detection Mode
Enable/Disable Voice
Activity Detection for
G.729.
0 = Disable
1 = Enable
Default is 0
X
84-19-09
SIP Extension CODEC
Information Basic Setup –
G.729 Jitter Buffer (min)
Define G.711 Jitter
Buffer minimum
accepted value.
0~300ms
Default is 20
X
84-19-10
SIP Extension CODEC
Information Basic Setup –
G.729 Jitter Buffer
(average)
Define G.729 Jitter
Buffer setting.
0~300ms
Default is 40
X
84-19-11
SIP Extension CODEC
Information Basic Setup –
G.729 Jitter Buffer (max)
Define G.729 Jitter
Buffer maximum
accepted value.
0~300ms
Default is 80
X
84-19-17
SIP Extension CODEC
Information Basic Setup –
Jitter Buffer Mode
Define the Jitter Buffer
mode – supported
Static or Immediate.
1 = Static
2 = Not used
3 = Adaptive
Immediately
Default is 3
X
84-19-18
SIP Extension CODEC
Information Basic Setup –
VAD Threshold
Define the VAD
Threshold.
0~30
Default is 20
X
84-19-28
SIP Extension CODEC
Information Basic Setup –
Audio Capability Priority
Define Audio capability
priority.
0 = G.711_PT
1 = G.723_PT
2 = G.729_PT
3 = G.722
4 = G.726
5 = iLBC
Default is 0
X
84-19-31
SIP Extension CODEC
Information Basic Setup –
DTMF Payload Number
Define the DTMF
Payload Number.
96~127
Default is 96
X
84-19-32
SIP Extension CODEC
Information Basic Setup –
DTMF Relay Mode
0 = Disable
1 = RFC2833
Default is 0
X
84-19-33
SIP Extension CODEC
Information Basic Setup –
Number of G.722 Audio
Frames
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
Default is 3
X
Program
Number
Program Name
Description/
Comments
Assigned Data 1 2 3