NEC SL1100 - Page 218

Issue 6.0 NEC SL1100
10 - 6 IP Single Line Telephone
2.2.5 SIP Extension CODEC Information
11-02-01 Extension Numbering
Assign up to eight
digits for extension
numbering
Dial (Up to eight digits)
Default
Ports 1~84 = 101~184
X
Program
Number
Program Name
Description/
Comments
Assigned Data 1 2 3
Program
Number
Program Name
Description/
Comments
Assigned Data 1 2 3
84-19-01
SIP Extension CODEC
Information Basic Setup –
Number of G.711 Audio
Frames
Define the G.711 audio
Frame Size
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
Default is 2
X
84-19-02
SIP Extension CODEC
Information Basic Setup –
G.711 Voice Activity
Detection Mode
Enable/Disable Voice
Activity Detection for
G.711.
0 = Disable
1 = Enable
Default is 0
X
84-19-03
SIP Extension CODEC
Information Basic Setup –
G.711 Type
Define the G.711 Type
– -law is
recommended in USA.
0 = A-law
1 = -law
Default is 1
X
84-19-04
SIP Extension CODEC
Information Basic Setup –
G.711 Jitter Buffer (min)
Define G.711 Jitter
Buffer minimum
accepted value.
0~300ms
Default is 20
X
84-19-05
SIP Extension CODEC
Information Basic Setup –
G.711 Jitter Buffer
(Average)
Define G.711 Jitter
Buffer setting.
0~300ms
Default is 40
X
84-19-06
SIP Extension CODEC
Information Basic Setup –
G.711 Jitter Buffer (max)
Define G.711 Jitter
Buffer maximum
accepted value.
0~300ms
Default is 80
X
84-19-07
SIP Extension CODEC
Information Basic Setup –
Number of G.729 Audio
Frames
Define the G.729 audio
Frame Size.
1~6
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
5 = 50ms
6 = 60ms
Default is 2
X