NEC SL1100 - Page 223

NEC SL1100 Issue 6.0
Networking Manual 10 - 11
2.2.7 IP Phone Configuration
Program
Number
Program Name
Description/
Comments
Assigned Data 1 2 3
15-05-01
IP Telephone Terminal Basic
Data Setup – Terminal Type
Review the type
protocol support by the
IP Phone.
Viewing Only – No
changes
permitted.
0 = NGT
1 = H.323
2 = SIP
3 = MEGACO
4 = SIP-MLT
READ ONLY
Default = 3
X
15-05-02
IP Telephone Terminal Basic
Data Setup – Terminal MAC
Address
MAC Address of
registered MLT SIP
phone is stored and/or
can input the MAC
address of an MLT SIP
phone so when it
comes online it is
provided with the
extension in which the
MAC address
matches.
MAC address
00-00-00-00-00-00 to
FF-FF-FF-FF-FF-FF
Default is
00-00-00-00-00-00 X
15-05-07
IP Telephone Terminal Basic
Data Setup – Using IP
Address
Informational Only
registered IP Phones
0.0.0.0~255.255.255.255
Default is 0.0.0.0
X
15-05-16
IP Telephone Terminal Basic
Data Setup – Password
Assign the
authentication
password for SIP
single line
telephones.
Up to 24 characters
Default not assigned
X
15-05-18
IP Telephone Terminal Basic
Data Setup – IP Duplication
Allowed Group
If an adapter has one
IP address coming into
it but multiple
extensions off of it,
assign all extensions to
a group so the CPU
knows that the one IP
address is assigned to
multiple extensions.
0 = Not Used
1 = Group 1
2 = Group 2
3 = Group 3
4 = Group 4
5 = Group 5
6 = Group 6
7 = Group 7
8 = Group 8
9 = Group 9
10 = Group 10
Default is 0
X