Netafim nmc-pro - Read from Data Plug

NMC-PRO Installation Manual
106Page
SETUP MENU
10.10 Read from Data Plug
Use a data-plug to upload and restore controller settings when needed. Plug the data-plug into the NMC-PRO data-
plug socket (see the figure below).
Data-plug

Note: The Data plug should be used when the system is idle; otherwise, some of the running programs might be
interrupted and moved to halt.
Enter the READ FROM DATA PLUG screen and confirm your choice.

Note: When reading from the data-plug, the current settings data on the controller will be overwritten.