Netafim nmc-pro - Dual Ec;Ph Sensors

NMC-PRO Installation Manual
136Page
CONTROLLER ADVANCED SETTINGS
13.6 Dual EC/pH Sensors
Additional sensors as fail-safe and to verify if difference occurs; alarms signal.
DUAL EC/pH SENSORS- Additional sensors as fail-safe and to verify if difference occurs, alarm will signal.
End day time
Max. cooling parallel
Max. misting parallel
Define cooling/misting
valve/pump
Set max. cooling/misting
programs working together
Stop time for measuring water and dosing
accumulating information from irrigation
valves and dosing channels
NOTE: Operate max # cooling/misting
programs according to system water
pressure limit.
Select action and delay-
if 1 sensor fails, sensor 2 activated
Install sensors
as in section
7.4
Enter sensor difference to set alarm