NMC-PRO Installation Manual
138Page
CONTROLLER ADVANCED SETTINGS
13.7 Hot Keys and Status Screens
In the Active Irrigation screen, view the status of the system by pressing number keys corresponding to each hot key.
13.8 Operation Mode
There are three levels of operation:
• Read Only (restricted): All the parameters and menus are visible, but cannot be modified
• User (partially restricted): Menus 1-6 are fully accessible and can be modified. Menus 7 and 8 can be
viewed but not modified
• Technician (unrestricted): All menus are fully accessible (no restrictions)
To change the operation mode, select Mode.
On the Front Panel, press Zone/Log In.
The controller recognizes the
operation mode according to
the password that is entered:
Please Enter Password
Hot Screen 4- Water Flow & EC/pH
Status
Hot Screen 5- Filter Flushing
Hot Screen 6- Temp. & Hum.
Hot Screen 7- Weather Station
To Next Page
Loading...
Need help?
General
