NMC-PRO Installation Manual
18Page
4 ELECTRICAL INSTALLATION
• Input/Output, page 21
• Output Terminal, page 21
• Input Terminals, page 25
• Expansion Unit Connection: Card Connection Options, page 31
• Controller Setup, page 40
• Controller Test Procedure, page 42
• System Configuration Procedure, page 45
4.1 Input/Output
• Layout, page 18
• I/O Card Layout, page 19
• Controller Hardware Verification, page 20
• Input/Output Wiring, page 20
4.1.1 Layout
The following diagram is an example setup of an NMC Pro board. Actual boards may differ.
To Next Page
