Netafim nmc-pro Installation Guide

NMC-PRO Installation Manual
16Page
ELECTRICAL INSTALLATION
3.6 Firmware Upgrade
The Bootloader application enables installing or updating the system firmware. The application is menu based and
simple to use and enables updating the firmware from an SD card.

Note: Verify that the card is in place before starting.
3.6.1 Accessing the Application
1. Press and hold the Left and Down arrow keys.
2. Turn on the unit.
In the screen that appears, enter the password: 38845.

Note: If you enter the wrong password, an error message appears and the program goes to the Main Screen.
Repeat the process.
3. Press Enter. The screen below appears.

Note: Hardware Test is used for quality control only.
SELECT AN OPTION
Hardware Firmware
Hardware Test
Cancel Update

Netafim nmc-pro Specifications

General

Brand	Netafim
Model	nmc-pro
Category	Controller
Language	English