NMC-PRO Installation Manual
77Page
2. Select 'Yes' to confirm your choice and start the relevant program.
3. When you enter the Start/Stop screen during irrigation you will be asked whether you wish to stop the active
program. Choose Yes to stop the program.
6.2.1 Start/Stop Valve
1. Enter a valve number, Run Time program and (optional) dosing program, press Enter to confirm and then press the
menu button to open the confirmation screen.
2. Select 'Yes' if you wish to start the relevant valve.
3. When you enter the Start/Stop screen and a valve is active you will be asked whether you wish to stop the relevant
valve. Choose Yes to stop the valve.
6.3 Filter Flushing
To flush filters manually, follow the prompts, select which filters to flush with the arrow keys and press ENTER to
confirm. You can flush all filters or individual filters (without Pump or Main valve operation)
To Next Page
Loading...
Need help?
General
