NMC-PRO Installation Manual
86Page
8.1 Irrigation Log
The Irrigation Log table includes up to 200 rows of the last irrigations data. Each row includes information regarding a
specific irrigation.
• To view additional information, use the left/right arrow keys.
• To switch between dosing quantities or time simply press the ‘+/-‘ key.
• Date: Date in which the irrigation started.
• Time: Time in which the irrigation started.
• Valve: Leading valve; the first valve set for the group of valves
• Reason: Specification of the irrigation triggers; time, condition, Rad Sum, etc.
• Water: Irrigation quantity (m3 or gallon) or irrigation time.
• Duration: Irrigation duration (hh:mm:ss).
• Flow: Average flow throughout the irrigation cycle.
• Chan. #: Dosing quantities per channel (liter or gallon) or dosing time.
• EC Low: Lowest EC value recorded during irrigation.
• EC Avg.: Average EC value recorded during irrigation.
• EC High: Highest EC value recorded during irrigation.
• pH Low: Lowest pH value recorded during irrigation.
• pH Avg.: Average pH value recorded during irrigation.
• pH High: Highest pH value recorded during irrigation.
Note: Water quantity is measured in m3 or gallons, duration is measured by time, flow is measured in m3/h or
gallon/m, dosing quantity is measured in liters or gallons.
8.2 RAD. / VPD Sum & Drain Log
• Time: Time irrigation started.
• Valve: Leading valve.
• Reason: Specification of the irrigation triggers; time, condition, rad sum, etc.
• Water: Irrigation quantity (m3 or gallon) or irrigation time.
• Drain %: Percentage of drain for relevant irrigation cycle.
• Drain: Drain quantity related to relevant irrigation.
• Rad Sum: Accumulated radiation sum level when irrigation started.
• VPD Sum: Accumulated VPD sum level when irrigation started.
• Interval: Time (in minutes) since last irrigation cycle. Refers to the last irrigation of a specific valve.
To Next Page
Loading...
Need help?
General
