NMC-PRO Installation Manual
76Page
6 MANUAL OPERATION MENU
• Irrigation Pause, page 76
• Start/Stop Program, page 76
• Start/Stop Valve, page 77
6.1 Irrigation Pause
• Pause Irrigation (Yes/No): Set Yes and press Enter to confirm; all irrigations will be paused until the value
will be set back to No. When the system is released from Pause mode it will complete all irrigations that
should have taken place when it was paused.
6.2 Start/Stop Program
1. Enter a program number to start and press ENTER.
To Next Page
