1. Outline
PROGRAMMABLE AC POWER SOURCE
6
Restriction of CO
2
emission (= power usage) and the display of CO
2
emission (= power
usage) during operation
The efficiency is improved by about 27% compared to the linear amplifier method by adopting the
switching amplifier method. When the power output is low, the internal loss can be lowered by
reducing the number of power units being powered on. The function for calculating and displaying
the CO
2
emission from the internal loss or output power.
Selecting specification when ordering
Power Input
Single-phase input (1P2W) /three-phase three-wire input* (3P3W)
/three-phase four-wire input* (3P4W)
* Three-phase three-wire input and three-phase four-wire input can be selected for the model of
which the output capacity is 4.5 kVA or more.
Communication Interface
GPIB or LAN (LXI 1.4)
Options (partial)
Remote Controller
A remote controller with the numeric keypad, jog, and shuttle.
System Cable (for single-phase three-wire/three-phase connection)
Connects the products of the configurable single-phase model by this cable to configure a
polyphase output system.
Power Cable
Cables for the power input.
Cable Holder
By mounting it to this product, you can fix power cables and/or output cables.
To Next Page
Loading...