Nikon D300S - Page 166

II The WB Button
At settings other than [3 (Choose color temp.) and PRE (Preset
manual), the WB button can be used to fine-tune white balance on
the amber (A)-blue
(B) axis (CD 138; to fine-tune white balance
when
[3 or PRE is selected, use the shooting menu as described on
page 137).
Six settings in both directions are available; each
increment
is equivalent to about 5 mired (CD 139). Press the WB
button and rotate the sub-command dial until the desired value is
displayed in the control panel. Rotating the sub-command dial to
the left increases the amount of amber (A). Rotating the sub-
command dial to the right increases the amount of blue (B). At
settings
other than 0, a ~~ icon appears in the control panel.
WB button
__ ( ~A J----J
Control panel
140