Nikon D300S - B4: Easy Exposure Compensation; B4 Easy Exposure Compensation

>
b4: Easy Exposure Compensation MENU button ... If Custom Settings menu i
~~:~~7·j ir--i'g-!'~_¢(::l'"?-IJi!L%Ol ;oj~- '\f'Y-i'~i'J!;~i(~I,~~,I!'l~~~~~;" .;-.1
This option controls whether the IB button is needed to set
exposure compensation
(0 118). If On (Auto reset) or On is
selected, the 0 at the center of the exposure display will blink even
when exposure compensation is set to +0.
Option
RESET On (Auto reset)
On
Off
Description
Exposure compensation is set by rotating one of the
command dials (see note below). The setting
selected using
the command dial is reset when the
camera or exposure meters turn off (exposure
compensation settings selected using the ~ button
,are not reset).
As above, except that the exposure compensation
:value selected using
the command dial is not reset
.
when the camera or exposure meters turn off.
- ,- ',-'
.Exposure compensation is set by pressing the ~
button and rotating the main command dial.
B Change Main/Sub
The dial used to set exposure compensation when On (Auto reset) or
On is selected for Custom Setting b4 (Easy exposure compensation)
depends on the option selected for Custom Setting f8 (Customize
command dials) > Change main/sub (0 297).
p
rn
3 ~ 5
o 0
a. '" ,..
n> S·H
tD
M
- -,'
Customize command dials> Change main/sub
Off On
Sub-command dial Sub-command dial
Sub-command dial Main command dial
Main
command dial Sub-command dial
- -
N/A
271