Nikon D300S - Wireless and Ethernet Networks

Wireless and Ethernet Networks
If the optional WT-4 wireless transmitter (0 352) is attached,
photographs can be transferred or printed over wireless or
Ethernet networks and the camera can also be controlled from
network computers running Camera Control Pro 2 (available
separately). The WT-4 can be used in any
of the following modes:
Mode
Transfer mode
Thumbnail
select mode
PC mode
Print mode
Function
Upload new or existing photographs to computer or ftp
server.
Preview
photographs on computer monitor before
upload.
Control camera
from computer using Camera Control
Pro 2 (available separately).
.Print
JPEG photographs on printer connected to network
computer.
For more information, see the WT-4 user's manual. Be sure to
update to the latest versions of the WT-4 firmware and supplied
software.
~ Transfer Mode
When Wireless transmitter> Mode> Transfer mode is selected in the
camera setup menu, the 0 button is used during playback to select
pictures
for upload, preventing it from being used to select pictures for
other operations, such as side-by-side comparison (0 331). To restore
normal operation, select another option for Wireless transmitter>
Mode.
(g Movies
The WT-4 can be used to upload movies in transfer mode if Auto send
or Send folder is not selected for Transfer settings. Movies can not be
uploaded in thumbnail selector mode.
(g WT-4A/B/C/D/E
The principal difference between the WT-4 and WT-4A/B/C/D/E is in the
number of channels supported; unless otherwise stated, all references
to the WT-4 also apply to the WT-4A/B/C/D/E.
227