Nikon D300S - Page 351

4 Select the second
photograph.
The selected image will appear
as Image 1. Press ~ to
highlight Image 2 and repeat
steps
2-3 to select the second photo.
5 Set gain.
Highlight Image 1 or Image 2
and optimize exposure for the
overlay by pressing'" or .. to
select the gain for image 1
from values between 0.1 and
2.0. Repeat
for the second image. The default value is 1.0;
selecting 0.5 cuts gain in half, while selecting 2.0 doubles gain.
The effects
of gain are visible in the Preview column.
6 Highlight the Preview
column.
Press'" or ~ to highlight the
Preview column.
7 Preview the overlay.
Press'" or" to highlight
Overlay and press ® (to save [ _~
the overlay without displaying •
a preview,
highlight Save and
press
®). To return to Step 5
and select
new photos or adjust gain, press ~~.
325