4
Raise
the
mirror.
Press
the
shutter-release
button
all
the
way
down.
The mirror will be raised and
the
shutter curtain will open,
revealing the low-pass filter. The display in
the
viewfinder will
turn
off
and
the
row
of
dashes in
the
control panel will blink.
5 Examine
the
low-pass filter.
Holding the camera
so
that
light
falls on
the
low-pass filter, examine
the
filter for
dust
or
lint. If
no
foreign objects are
present, proceed
to
Step
7.
---------
6 Clean
the
filter.
Remove any dust and
lint
from
the
filter
with
a blower. Do
not
use a blower-
brush,
as
the bristles could damage
the
filter.
Dirt
that
can
not
be removed
with
a
blower
can
only
be removed by Nikon-
authorized service personnel. Under
no
circumstances should
you touch
or
wipe
the
filter.
7 Turn
the
camera off.
The mirror will return
to
the
down
position and
the
shutter
curtain will close. Replace
the
lens or
body
cap.
362
To Next Page
Loading...
