Contrast-detect focus
point
AF-ON
button
~~i
'--;::=::+=;4
To
focus using contrast-detect
autofocus, press the
AF-ON
button.
The
focus
point
will blink green and the
monitor
may brighten while the camera
focuses.
If
the camera
is
able
to
focus
using contrast-detect autofocus, the
focus
point
will be displayed in green;
if
the camera
is
unable
to
focus, the focus
point
will
blink
red.
4 Focus.
Autofocus
(focus mode S
or
():
In
tripod
mode, the focus
point
for contrast-detect autofocus
can be moved
to
any
point
in
the frame using the
multi
selector.
~
Contrast-Detect Autofocus
The camera will
not
continue
to
adjust focus while
the
AF-ON
button
is
pressed in continuous-servo autofocus mode. In
both
single-
servo and continuous-servo autofocus modes,
the
shutter can be
released even
when
the
camera
is
not
in focus.
Manual
focus
(focus
mode
M;
CD
83):
Use
zoom for precise focus.
To
magnify the view in the
<t{
button
monitor
up
to
13
x and
check focus, press the
<t{
button.
While
the
view
through
the lens
is
zoomed in, a
navigation
window
will
appear in the
bottom
right
corner
of
the display.
Use
the
multi
selector
to
scroll
to
areas
of
the frame
not
visible in the monitor.
Press
®
to
exit zoom.
50
To Next Page
Loading...
