NoniusSoft, Software e Consultoria para
Telecomunicações, S.A.
Rua Actor Ferreira da Silva, 100
4200-298 Porto • Portugal
5.3.2. Project Steps
Network and Services Planning
Configure the Access Points with one SSID
per
company and provide a WPA2 key for each
company. Create a VLAN tag
per
SSID and connect each access point to a switch that VLAN-
capable and configure the ports where you connect the APs as members of the VLANs you created.
Wi-Fi Site Survey
The site-survey must guarantee that the SSID of a given company covers the working area of that
company. There also must be one access point in each meeting room, allowing the companies to
run meetings in those rooms and to keep having access to their internal network.
WGS5000 Configuration
The following parameters were configured at the WGS5000:
WAN interface – Static or dynamic IP depending on the access router/bridge;
Firewall - IPSec Pass-through: ON, Customer LAN Protection: OFF, Client port forwarding:
add usernames or MAC addresses of each company‟s internal server and make sure that
each server uses a different port for the same service (for ex., port 80 may be used by one
of the companies and port 8080 must be used by a second company, for web access).
VLAN - Enable 802.1Q VLAN: enable; Interface: LAN; 802.1Q VID: insert VLAN ID;
Interface Type: Bridge;
QoS - Quality of Service: ON;
Customization - according customer details;
Training
Two training sessions must be provided: one to the administrator of the business park and another
to the IT manager.
Admin level training: please check the WGManager‟s administrator manual;
IT manager: the training consisted on explaining the WGConfig interface and is based on
this manual.
The session included training on the WGManager‟s interface and generic information about Wireless
Internet.
To Next Page
Loading...