OPERATING MANUAL
5-4
21833-3.4
NORMARC 7013
INSTRUMENT LANDING SYSTEM
Remote Maintenance and Monitoring ©1999 Navia Aviation AS
istics:
• a title bar
• a close box
• scroll bars
• a zoom box
• A window that controls a modem also has a flow display icon. This icon is normally chang-
ing, indicating that new data is received from the ILS station.
The close box of a window is the box in the upper left corner. Click this box to quickly close the
window. (Or choose Window | Close, with shortcut Alt+F3). The Help window is considered
temporary; you can also close it by pressing Esc.
The title bar, the topmost horizontal bar of a window, contains the name of the window. Dou-
ble-clicking the title bar zoom the window. You can also drag the title bar to move the window
around.
The zoom box of a window appears in the upper right corner. If the icon is an up arrow, you
may click the arrow to enlarge the window to the largest size possible. If the icon is a double
headed arrow, the window is already at its maximum size. In that case, clicking it returns the
window to its previous size. To zoom a window from the keyboard, choose Window | Zoom,
with shortcut F5).
Shortcut: Double-click the title bar of a window to zoom or restore it.
5.3.1.1 Scrolling the contents of a window
Scroll bars are horizontal or vertical bars with an arrow in each end, and a box between these.
You use the scroll bars with a mouse to scroll the contents of an ILS parameter display win-
dow. Click the arrow at either end to scroll one line at a time. (Keep the mouse button pressed
to scroll continuously.) You can click the shaded area to either side of the scroll box to scroll a
page at a time. Finally, you can drag the scroll box to any spot on the bar to quickly move to a
place in the window relative to the position of the scroll box.
5.3.1.2 Resizing a window
You can resize a window by dragging the resize corner (the bottom, right corner) of the win-
dow. The resize corner is displayed as single outline part of the window frame. To resize using
the keyboard, choose Size/Move from the Window menu. Pressing the arrow keys will then
move the window, and Shift+arrow keys resizes the window. Note that resizing only applies to
windows which has a resize corner.
5.3.1.3 Quick window management
The next table gives you a quick run-down of how to handle windows in the ILS Data Sampler.
Note that you don't need a mouse to perform these actions - a keyboard works just fine.
Every window that displays ILS parameters has a small control window. This control window is
placed at the upper left corner of the desktop when you choose to display a log file, or connect
to an ILS station.
To Next Page
Loading...