Using the Console Interface
893-00992-E
3-5
Navigating the CI Menus and Screens
Use the following methods to navigate the CI menus and screens:
• To select a command:
a.
Use the arrow keys to highlight the command name.
b.
Press [Enter].
The command takes effect immediately after you press [Enter].
Alternatively, you can press the key corresponding to the underlined letter in
the command name. For example, to select the Sw
itch Configuration
command in the main menu, press the W key. Note that the text characters are
not case-sensitive.
• To toggle between settings:
a.
Use the spacebar to highlight the setting.
b.
Press [Enter].
• To clear a string field:
a.
Position the cursor in the string field.
b.
Press [Ctrl]+K.
• To return to the previous menu, press [Ctrl]+R.
• To return to the main menu at any time, press [Ctrl]+C.
• Press [Backspace] to delete entered text.
• Accelerator Keys
You can use accelerator keys to enter repetitive data into the fields of certain
screens.
The accelerator keys can be used only on fields that require entering a list,
which includes the MAC Address Security Configuration screen and the
MAC Address Security Table screen.
For more information about using the accelerator keys, see “
Accelerator Keys
for Repetitive Tasks” on page 3-32.
To Next Page
Loading...
