Nortel BayStack 350 Series - MAC Address Security Configuration; Figure 3-11. MAC Address Security Configuration Screen

Using the BayStack 350 Series 10/100 Autosense Switch
3-28
893-00992-E
MAC Address Security Configuration
The MAC Address Security Configuration screen (Figure 3-11
) allows you to
Enable (or Disable) the MAC Address Security feature and to specify the
appropriate system response to any unauthorized network access to your switch.
Choose MAC Address Security Configuration (or press c) from the MAC Address
Security Configuration Menu to open the MAC Address Security Configuration
screen.
Figure 3-11. MAC Address Security Configuration Screen
Table 3-10 describes the MAC Address Security Configuration screen fields.
MAC Address Security Configuration
MAC Address Security SNMP-Locked: [ Disabled ]
MAC Address Security: [ Disabled ]
Partition Port on Intrusion Detected: [ Disabled ]
DA Filtering on Intrusion Detected: [ Disabled ]
Generate SNMP Trap on Intrusion: [ Disabled ]
MAC Security Table:
Secure Ports: [ NONE ]
Clear by Ports: [ NONE ]
Learn by Ports: [ NONE ]
Current Learning Mode: [ Not Learning ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.