Using the BayStack 350 Series 10/100 Autosense Switch
1-12
893-00992-E
BootP Automatic IP Configuration
The BayStack 350 switch has a unique 48-bit hardware address, or MAC address,
that is printed on a label on the back panel. You use this MAC address when you
configure the network BootP server to recognize the BayStack 350 switch BootP
requests. A properly configured BootP server enables the switch to automatically
learn its assigned IP address, subnet mask, IP address of the default router (default
gateway), and software image file name.
For an example of a BootP configuration file, see Appendix E, “Sample BootP
Configuration File.”
SNMP MIB Support
The BayStack 350 switch supports an SNMP agent with private MIB extensions,
which ensures compatibility with existing network management tools. The
BayStack 350 switch supports MIB-II (RFC 1213) and the RMON MIB
(RFC 1757), which provide access to detailed management statistics. With SNMP
management, you can configure SNMP traps (on individual ports) to be generated
automatically for conditions such as an unauthorized access attempt or changes in
a port’s operating status.
To Next Page
Loading...
