Nortel BayStack 350 Series - Network Security

Using the Console Interface
893-00992-E
3-77
Network Security
The RADIUS Network Security screen (Figure 3-33) allows you to set up or
modify the Radius server. You can configure a primary RADIUS server and also
add a secondary RADIUS server to provide redundant security in case the Primary
server is out of commision.
You can Enable or Disable RADIUS authentication to your Console or any
TELNET session using this screen.
Choose Network Security (or press k) from the main menu to open the RADIUS
Network Security screen.
Figure 3-33. Radius Network Security Screen
RADIUS Network Security
Primary RADIUS Server: [ 0.0.0.0 ]
Secondary RADIUS Server: [ 0.0.0.0 ]
RADIUS UDP Port: [ 0 ]
Shared Secret: [ ]
Password/User Access: [ Local password ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.