Nortel BayStack 350 Series - SNMP Port Trap Enable;Disable Options; Figure 3-6. SNMP Port Link Up;Down Trap Option Screen

Using the BayStack 350 Series 10/100 Autosense Switch
3-18
893-00992-E
SNMP Port Trap Enable/Disable Options
The SNMP Port Link Up/Down Trap Options screen (Figure 3-6) allows you to
set or modify SNMP port link up/down traps for any (or all) switch ports.
Choose SNMP Port Trap Enable/Disable Options (or press p) from the SNMP
Configuration Menu screen to open the SNMP Port Link Up/Down Trap Options
screen.
Figure 3-6. SNMP Port Link Up/Down Trap Option Screen
Table 3-5 describes the SNMP Port Link Up/Down Trap Option screen fields.
SNMP Port Link Up/Down Trap Options
Port Link Up/Down Trap Status
---- ------------------------
1 [ Disabled ]
2 [ Disabled ]
3 [ Disabled ]
4 [ Disabled ]
5 [ Disabled ]
6 [ Disabled ]
7 [ Disabled ]
8 [ Disabled ]
9 [ Disabled ]
10 [ Disabled ]
11 [ Disabled ]
12 [ Disabled ]
13 [ Disabled ]
14 [ Disabled ]
15 [ Disabled ]
16 [ Disabled ]
All [ Disabled ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.