Nortel BayStack 350 Series - Switch Configuration

Using the BayStack 350 Series 10/100 Autosense Switch
3-22
893-00992-E
Switch Configuration
The Switch Configuration Menu screen (Figure 3-8) allows you to set or modify
your switch configuration.
Choose Switch Configuration (or press w) from the main menu to open the Switch
Configuration Menu screen.
Figure 3-8. Switch Configuration Menu screen
Switch Configuration Menu
MAC Address Table
MAC Address-Based Security...
VLAN Configuration...
Port Configuration...
MultiLink Trunk Configuration...
Port Mirroring Configuration...
Rate Limiting Configuration...
Display Port Statistics
Clear All Port Statistics
Return to Main Menu
Use arrow keys to highlight option, press <Return> or <Enter> to select
option.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.