Using the BayStack 350 Series 10/100 Autosense Switch
3-68
893-00992-E
TELNET Configuration
The TELNET Configuration screen (Figure 3-30) allows a user at a remote
console terminal to communicate with the BayStack 350 switch as if the console
terminal were directly connected to it. You can have up to four active TELNET
sessions at one time.
Choose TELNET Configuration (or press t) from the main menu to open the
TELNET Configuration screen.
Figure 3-30. TELNET Configuration screen
Table 3-29 describes the TELNET Configuration screen fields.
TELNET Configuration
TELNET Access: [ Enabled ]
Login Timeout: [ 1 minute ]
Login Retries: [ 3 ]
Inactivity Timeout: [ 15 minutes ]
Event Logging: [ All ]
Allowed Source IP Address Allowed Source Mask
------------------------- -------------------------
[ 0.0.0.0 ] [ 0.0.0.0 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
[ 255.255.255.255 ] [ 255.255.255.255 ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
To Next Page
Loading...
