893-00992-E
xix
Preface
Congratulations on your purchase of the BayStack
™
350 switch, part of the
Nortel Networks
™
BayStack 10/100 Switch line of communications products.
There are four versions of the BayStack 350 Series 10/100 Autosense Switch: the
Model 350F-HD, the Model 350F, the Model 350T-HD, and the Model 350T. This
guide describes the features, uses, and installation procedures for the four models.
(Unless otherwise specified, the terms “BayStack 350 switch” and “switch” refer
to all four switch versions.)
Audience
This guide is intended for network installers and system administrators who are
responsible for installing, configuring, or maintaining networks. This guide
assumes that you understand the transmission and management protocols used on
your network.
Organization
This guide has four chapters, five appendixes, and an index:
If you want to: Go to:
Learn about the BayStack 350 switch and its key features.
This
chapter also describes the Quick-Start procedures for quick
access to the switch management features.
Chapter 1
Install the BayStack 350 switch on a flat surface, in a 19-inch
equipment rack, on a wall, and to verify its operation
Chapter 2
(continued)