Nortel BayStack 350 Series - Console;Service Port Configuration

Using the BayStack 350 Series 10/100 Autosense Switch
3-58
893-00992-E
Console/Service Port Configuration
The Console/Service Port Configuration screen (Figure 3-26) allows you to
configure and modify the console/service port parameters.
Choose Console/Service Port Configuration (or press v) from the main menu to
open the Console/Service Port Configuration screen.
Figure 3-26. Console/Service Port Configuration screen
Table 3-22 describes the Console/Service Port Configuration screen fields.
Table 3-22. Console/Service Port Configuration screen fields
Field Description
Service Port Data Bits
A read-only field that indicates the current service port data bit setting.
Service Port Parity
A read-only field that indicates the current service port parity setting.
(continued)
Console/Service Port Configuration
Service Port Data Bits: 8 Data Bits
Service Port Parity: No Parity
Service Port Stop Bits: 1 Stop Bit
Console Port Speed: [ 9600 Baud ]
Console Password: [ Not Required ]
Console Read-Only Password: [ user ]
Console Read-Write Password: [ secure ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.