893-00992-E B-1
Appendix B
Server/Trunk Connections
Optimal Server/Trunk Connections
When you connect MultiLink Trunks to servers that use a single MAC address,
configure the trunk members using the port groups shown in Tab le B-1
for optimal
throughput:
For more information about server/trunk connections, see “Server Trunk
Configuration” on page 1-26.
Table B-1. Optimal server/trunk connections
To connect this Model...
to a 2-port server,
group these ports:
to a 3-port server,
group these ports:
to a 4-port server,
group these ports:
BayStack 350T (3 and 6) or
(4 and 5) or
(7 and 9) or
(10 and 16)
(3, 6, and 11) or
(4, 5, and 12) or
(7, 9, and 15) or
(8, 10, and 16)
(3, 6, 1, and 14) or
(4, 5, 12, and 13) or
(1, 7, 9, and 15) or
(2, 8, 10, and 16)
BayStack 350F (4 and 5) or
(6 and 7) or
(8 and 9) or
(12 and 14)
(4, 5, and 12) or
(6, 7, and 13) or
(8, 9, and 13) or
(10, 12, and 14)
Not supported for this
model.
BayStack 350F-HD (4 and 5) or
(6 and 7) or
(8 and 9) or
(20 and 21)
(4, 5, and 12) or
(6, 7, and 9) or
(8, 9, and 13) or
(13, 20, and 21)
(4, 5, 12, and 16) or
(6, 7, 9, and 17) or
(8, 9, 13, and 19) or
(12, 13, 20, and 21)
BayStack 350T-HD (4 and 5) or
(6 and 7) or
(8 and 9) or
(20 and 21)
(4, 5, and 12) or
(6, 7, and 9) or
(8, 9, and 13) or
(13, 20, and 21)
(4, 5, 12, and 17) or
(6, 7, 9, and 17) or
(8, 9, 13, and 19) or
(12, 13, 20, and 21)
To Next Page