Using the Console Interface
893-00992-E
3-51
Rate Limiting Configuration
The Rate Limiting Configuration screen allows you to limit the forwarding rate of
broadcast and multicast packets.
Choose Rate Limiting Configuration (or press l) from the Switch Configuration
Menu screen to open the Rate Limiting Configuration screen.
Figure 3-23
and Figure 3-24 show sample rate limiting settings for the two Model
350F-HD Rate Limiting Configuration screens.
Figure 3-23. Model 350F-HD Rate Limiting Configuration screen (1 of 2)
Note:
The Model 350F and Model 350T display all ports on one screen.
Rate Limiting Configuration
Port Packet Type Limit Last 5 Minutes Last Hour Last 24 Hours
---- ------------- -------- -------------- --------- -------------
1 [ Both ] [ None ] 56.0% 22.0% 13.0%
2 [ Multicast ] [ 9% ] 30.0% 27.0% 12.0%
3 [ Both ] [ None ] 25.0% 24.0% 18.0%
4 [ Both ] [ 10% ] 72.0% 53.0% 14.0%
5 [ Broadcast ] [ 10% ] 35.0% 57.0% 12.0%
6 [ multicast ] [ 10% ] 96.0% 98.0% 99.0%
7 [ Both ] [ 10% ] 86.0% 85.0% 95.0%
8 [ Both ] [ 5% ] 58.0% 65.0% 72.0%
9 [ Broadcast ] [ None ] 11.0% 13.0% 52.0%
10 [ Both ] [ None ] 27.0% 21.0% 43.0%
11 [ Both ] [ None ] 15.0% 25.0% 23.0%
12 [ Both ] [ None ] 12.0% 15.0% 22.0%
More...
Press Ctrl-N to display choices for ports 13-26.
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
To Next Page