Nortel BayStack 350 Series - Page 186

Using the BayStack 350 Series 10/100 Autosense Switch
3-78
893-00992-E
Table 3-34 describes the RADIUS Network Security screen fields.
Table 3-34. RADIUS Network Security Screen Fields
Field Description
Primary RADIUS Server
The IP address of the Primary RADIUS server.
Default 0.0.0.0 (no IP address assigned)
Range Four-octet dotted-decimal notation, where each octet is
represented as a decimal value, separated by a decimal point
Secondary RADIUS
Server
The IP address of the Secondary RADIUS server.
Default 0.0.0.0 (no IP address assigned)
Range Four-octet dotted-decimal notation, where each octet is
represented as a decimal value, separated by a decimal point
RADIUS Server UDP Port
The user datagram protocol (UDP) port for the RADIUS server.
Default 1645
Range 0 to 65536
Shared Secret
Your special switch security code that provides authentication to the RADIUS
server.
Default Null string (which will not authenticate)
Range Any contiguous ASCII string that contains at least 1 printable
character, up to a maximum of 35.
Password/User Access
The RADIUS authentication password which can be Enabled or Disabled for
Console and TELNET. The value you choose for this field must be set in
conjunction with the console password field value (see “
Setting Security
Passwords on page 3-60)
Default Local password
Range Local password, Radius TELNET, RADIUS Console, RADIUS
both.