Nortel BayStack 350 Series - Page 178

Using the BayStack 350 Series 10/100 Autosense Switch
3-70
893-00992-E
Allowed Source
IP Address
Specifies up to 10 user-assigned host IP addresses that are allowed TELNET and SNMP
access to the switch.
Default 0.0.0.0 (no IP address assigned)
Range Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, separated by a decimal point
Allowed Source
Mask
Specifies up to 10 user-assigned allowed source address masks. The remote IP address
is masked with the source mask and, if the resulting value equals the source IP address,
the connection is allowed.
Default 0.0.0.0 (no IP mask assigned)
Range Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, separated by a decimal point
Table 3-29. TELNET Configuration screen fields
(continued)
Field Description