Oki MC770 - Disassembly and Replacement

45584901TH Rev.1
2-1 /
Oki Data CONFIDENTIAL
2. DISASSEMBLY AND REPLACEMENT
2.1 Removal and Installation of Options
Important:
• Before installing or removing options, turn the main powerswitch off and disconnect the
power cable from the outlet.
2.1.1 Inner Finisher (MJ-1038)
(1) Press the [Power] button on the control panel to shut it down.
(2) Turnthemainpowerswitchoftheequipmentoff.
(3) Disconnect the power cable.
(4) Open the scanner.
Fig. 2-1
(5) Remove 2 screws and take off the stacker tray.
Fig. 2-2