To Next Page

To Previous Page

45584901TH Rev.1

8-15 /

Oki Data CONFIDENTIAL

8.3.2 Update procedure

Important:

• ThelesystemofUSBdeviceshouldbeformattedintheFATorFAT32format.Becareful

since the devices formatted in NTFS or other format will not be able to be operated. The

ﬁle system can be conﬁrmed on the device properties in applications such as Explorer of

Windows.

• Nevershutdowntheequipmentduringtheupdate.Firmwaredataandthefollowingoption

data (if installed) could be damaged and may not be able to be operated properly.

- Data Overwrite Enabler (GP-1070)

- Meta Scan Enabler (GS-1010)

- External Interface Enabler (GS-1020)

- IPSec Enabler (GP-1080)

- Unicode Font Enabler (GS-1007)

[A] Update procedure

(1) Connect the USB device to the PC and write the model speciﬁc folder in which the

data ﬁle is stored.

Store the data ﬁle for updating in the model speciﬁc folder.

(2) Pressthe[POWER]buttononthecontrolpaneltoshutdowntheequipment.

(3) Connect the USB device [1] to the USB port [2] on the right upper cover.

[2]

[1]

Fig.8-10

(4) Pressthe[POWER]buttonwhilesimultaneouslyholdingdownthe[4]and[9]buttons.

Data in the USB device are checked and the checking status is displayed on the

screen.

Oki MC770 Maintenance Manual

Other manuals for Oki MC770