To Next Page

To Previous Page

45584901TH Rev.1

10-5 /

Oki Data CONFIDENTIAL

10.3 Notices

10.3.1 Setting code

Eachsignalwillbeenabledby configuringthesettingcode“08-9016”(Counterinstalled

externally).

08-9016

0: No external counter (Default)

1: Coin controller

5: Coin controller supporting ACS

10.3.2 Setting value change and restrictions when using the coin controller

1. Setting value

- 08-9016(Counterinstalledexternally): Setto“1” (Coincontroller).Thecoincontroller

supportingACS(AutoColorSelection)canbeconnectedbysettingto“5”(Coincontroller

supportingACS/mixed-size).However,operationisnotguaranteedunlessthespecication

for the ACS timing is met.

- 08-9017 (Setting for counter installed externally): It should be charged precisely according

to the usage.

 Example:Tochargeonlywhencopiesaremade,setto“1”.

- 08-6011 (Deﬁnition setting of large sized paper):

- Settingvalue“0”: Setthisvaluetoregard A3,LD,undefined, andcustomsizethat

exceeds 415 mm as large size.

- Settingvalue“1”:SetthisvaluetoregardA3,LD,undened,B4,Folio,14”LG,13.5”LG,

13”LG,Computerandcustomsizethatexceeds325mmaslargesize.

- Settingvalue“2”:SetthisvaluetoregardB4andcustomsizethatexceeds325mmas

large size.

Oki MC770 Maintenance Manual

Other manuals for Oki MC770