Oki MC770 - LED Emission Level Adjustment

45584901TH Rev.1
4-19 /
Oki Data CONFIDENTIAL
4.3.17 LEDemissionleveladjustment
TheLEDemissionlevelintheBOXprinting(black/binary),networkFAXande-mailFAXcanbe
set. The size of the dots can be adjusted.
<Adjustment Mode (05)>
Code Item to be adjusted Remarks
7330-0 LEDemissionlevel0/4 Thesmallerthevalueis,thesmallertheLED
emission level of the primary scanning direction
becomes.Therefore,thesmallerdotsare
reproduced accordingly.
Acceptable values: 0 to 255
(Default:Level0/4:0,Level1/4:63,Level2/4:
127,Level3/4:191,Level4/4:255)
7330-1 LEDemissionlevel1/4
7330-2 LEDemissionlevel2/4
7330-3 LEDemissionlevel3/4
7330-4 LEDemissionlevel4/4
Restarttheequipment,andperformtheprintingjob.
<Procedure>
The procedure is the same as that of

P.4-9“4.3.2Gammabalanceadjustment(BlackMode)”.
Notes:
• ThesettingvaluemustincreaseastheLEDemissionlevelnumber(0to4)becomeshigher.
Do not increase this order when setting the values.
• Usually,LEDemissionlevel4/4isthemosteffectiveintheblackmode.
• ItisnotappliedtotheimagesprintedintheBlackmodebytheprinterdriver.