45584901TH Rev.1
3-3 /
Oki Data CONFIDENTIAL
• Testmode(03)
Refer to
P.3-7“3.3Inputcheck(Testmode03)”and
P.3-8“3.4Outputcheck(testmode
03)”.
• Testprintmode(04)
Refer to
P.3-9“3.5Testprintmode(testmode04)”.
• Adjustmentmode(05)
Refer to
P.3-10“3.6OperationProcedureinAdjustmentMode(05)”,
P.3-12“3.7Test
printpatterninAdjustmentMode(05)”,and“Appendix”-“AdjustmentCode(05).”
Notes:
Whenthe powershould beturnedOFF,besureto shutdownthe equipmentbypressing
the[POWER]buttonforafewseconds.
Remarks:
• In“RAM”,theSRAMoftheboardinwhichthedataofeachcodeisstoredisindicated.“PU”
standsforthePUboardand“SYS”standsfortheCUboard.
• Settingmode(08)
Refer to
P.3-16“3.8OperationProcedureinSettingMode(08)”and“Appendix”-“Setting
Code (08).”
Notes:
Whenthe powershould beturnedOFF,besureto shutdownthe equipmentbypressing
the[POWER]buttonforafewseconds.
Remarks:
• In“RAM”,theSRAMoftheboardinwhichthedataofeachcodeisstoredisindicated.“PU”
standsforthePUboard,“SYS”,“NIC”or“UTY”standsfortheCUboard.
• Maintenancemode(68)
Referto“5.2Maintenancemenufunctions”intheHardwareGuide.
• Assistmode(3C)
Refer to
P.3-18“3.9AssistMode(3C)”.
• HDDassistmode(4C)
Refer to
P.3-21“3.10HDDAssistMode(4C)”.
• Filesystemrecoverymode(5C)
Refer to
P.3-25“3.11FileSystemRecoveryMode(5C)”.
• SRAMclearmode(6C)
Refer to
P.3-30“3.12SRAMClearMode(6C)”.
• Listprintmode(9S)
Refer to
P.3-32“3.13Listprintmode(9S)”.
• Firmwareupdatemode(49/89)
Refer to
P.8-1“8.FIRMWAREUPDATING”.