Oki MC770 - Page 35

45584901TH Rev.1
3-11 /
Oki Data CONFIDENTIAL
Procedure 7
[0][5]
[POWER]
[POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(Sub code)
[CLEAR]
(Corrects value)
[START][START]
*[CANCEL] or [CLEAR]
[CANCEL]
[FAX]
[START]
(Test copy)
[OK]
Stores value
in RAM
Automatic
adjustment
* Whentheautomaticadjustmentendsabnormally,anerrormessageisdisplayed.
* Returntostandbyscreenbypressingthe[CANCEL]or[CLEAR]button.
Procedure 10
[0][5]
[POWER]
[POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[Digital key]
(Sub code)
[START] [START][START]
[OK] or [INTERRUPT]
(Value unchangeable)
Value
displayed
Procedure 12
[0][5]
[POWER]
[POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[START]
[CANCEL]
[Digital key]
(Key in a value)
[CLEAR]
(Corrects value)
[OK]
or
[INTERRUPT]
(Stores value in RAM)
[FAX]
[START]
(Test copy)
Manual
adjustment
Procedure 14
[0][5]
[POWER]
[POWER]
OFF/ON
(Exit)
[Digital key]
(Code)
[START]
[START]
[Digital key]
(Sub code)
[RESET]
(Corrects value)
[CLEAR]
(Corrects value)
[OK]
or
[INTERRUPT]
[FAX]
[START]
(Test copy)
(Input value)
Stores value
in RAM
Notes:
The fuser belt temperature control at the adjustment mode is different from that at the normal
state.Therefore,the problemof fusing efficiencymaybe occurred inthetest copy atthe
adjustmentmode.Inthatcase,turnONthepowernormally,leavetheequipmentforapprox.3
minutes after it has become ready state and then start up the adjustment mode again.