Oki MC770 - Page 368

45584901TH Rev.1
11-65 /
Oki Data CONFIDENTIAL
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce-
dure
05 Adjustment
mode
Image
Proce-
ssing
Pure
Black/Gray
threshold
adjustment
PRT(color) PCL/Image 8212 0 General 1 1-255 SYS Thelargerthevalue,thewidertherangeofcolorsto
be replaced with black becomes.
Thesmallerthevalue,thenarrowertherange
becomes.
4
05 Adjustment
mode
Image
Proce-
ssing
Pure
Black/Gray
threshold
adjustment
PRT(color) PCL/Image 8212 1 Photo 1 1-255 SYS Thelargerthevalue,thewidertherangeofcolorsto
be replaced with black becomes.
Thesmallerthevalue,thenarrowertherange
becomes.
4
05 Adjustment
mode
Image
Proce-
ssing
Pure
Black/Gray
threshold
adjustment
PRT(color) PCL/Image 8212 2 Presentation 1 1-255 SYS Thelargerthevalue,thewidertherangeofcolorsto
be replaced with black becomes.
Thesmallerthevalue,thenarrowertherange
becomes.
4
05 Adjustment
mode
Image
Proce-
ssing
Pure
Black/Gray
threshold
adjustment
PRT(color) PCL/Image 8212 3 Lineart 8 1-255 SYS Thelargerthevalue,thewidertherangeofcolorsto
be replaced with black becomes.
Thesmallerthevalue,thenarrowertherange
becomes.
4
05 Adjustment
mode
Image
Proce-
ssing
Pure
Black/Gray
threshold
adjustment
PRT(color) Twin color print/
General
8213 Tex t 8 1-255 SYS Thelargerthevalue,thewidertherangeofcolorsto
be replaced with black becomes.
Thesmallerthevalue,thenarrowertherange
becomes.
1
05 Adjustment
mode
Image
Proce-
ssing
Pure
Black/Gray
threshold
adjustment
PRT(color) Twin color print/
General
8214 Graphics 1 1-255 SYS Thelargerthevalue,thewidertherangeofcolorsto
be replaced with black becomes.
Thesmallerthevalue,thenarrowertherange
becomes.
1
05 Adjustment
mode
Image
Proce-
ssing
Pure
Black/Gray
threshold
adjustment
PRT(color) Twin color print/
General
8215 Image 1 1-255 SYS Thelargerthevalue,thewidertherangeofcolorsto
be replaced with black becomes.
Thesmallerthevalue,thenarrowertherange
becomes.
1
05 Adjustment
mode
Image
Proce-
ssing
Black
selection
PRT(color) Twin color print 8218 Photo 0 0-1 SYS Sets whether the image on an original is printed in the
color or the black mode.
0: OFF (printed in color)
1: ON (printed in black)
1
05 Adjustment
mode
Image
Proce-
ssing
Stroke
adjustment
PS/PDF automatic
stroke adjustment
600dpi 8239 0 Default setting 1 0-3 SYS This code is used to change the width of fine lines in
PS and PDF printing. Automatic stroke adjustment
is the function that prevents the width from changing
according to the position.
This code sets whether automatic stroke adjustment is
enabled or disabled if it is not included in the print data.
Ifthissettingisdisabled,therewillbeanincreasein
cases in which the width of fine lines becomes thicker
by 1 dot when they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing data)
3: Forcibly enabled (Ignores command in printing data)
4