Oki MC770 - Page 369

45584901TH Rev.1
11-66 /
Oki Data CONFIDENTIAL
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce-
dure
05 Adjustment
mode
Image
Proce-
ssing
Stroke
adjustment
PS/PDF automatic
stroke adjustment
600dpi 8239 1 Minimum stroke
width when
disabled
1 1-2 SYS This code is used to change the width of fine lines in
PS and PDF printing. Automatic stroke adjustment
is the function that prevents the width from changing
according to the position.
This code sets the minimum width of fine lines when
the automatic stroke adjustment is disabled. For
example,ifautomaticstrokeadjustmentisdisabledand
thewidthofnelinesissetto"0"inthePScommand,
the width of the lines becomes 1 dot if the value of this
codeissetto"1";equally,ifitissetto"2",thewidthof
the lines becomes 2 dots.
1: 1 dot
2: 2 dots
4
05 Adjustment
mode
Image
Proce-
ssing
Stroke
adjustment
PS/PDF automatic
stroke adjustment
1200dpi 8239 2 Default setting 1 0-3 SYS This code is used to change the width of fine lines in
PS and PDF printing. Automatic stroke adjustment
is the function that prevents the width from changing
according to the position.
This code sets whether automatic stroke adjustment is
enabled or disabled if it is not included in the print data.
Ifthissettingisdisabled,therewillbeanincreasein
cases in which the width of fine lines becomes thicker
by 1 dot when they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing data)
3: Forcibly enabled (Ignores command in printing data)
4
05 Adjustment
mode
Image
Proce-
ssing
Stroke
adjustment
PS/PDF automatic
stroke adjustment
1200dpi 8239 3 Minimum stroke
width when
disabled
1 1-2 SYS This code is used to change the width of fine lines in
PS and PDF printing. Automatic stroke adjustment
is the function that prevents the width from changing
according to the position.
This code sets the minimum width of fine lines when
the automatic stroke adjustment is disabled. For
example,ifautomaticstrokeadjustmentisdisabledand
thewidthofnelinesissetto"0"inthePScommand,
the width of the lines becomes 1 dot if the value of this
codeissetto"1";equally,ifitissetto"2",thewidthof
the lines becomes 2 dots.
1: 1 dot
2: 2 dots
4
05 Adjustment
mode
Image
Proce-
ssing
Linewidth
minimum
value
adjustment
PRT(color) 8240 600dpi 2 1-9 SYS Thelargerthevalue,thedarkerthenelinesbecome. 1