Oki MC770 - Page 437

45584901TH Rev.1
11-134 /
Oki Data CONFIDENTIAL
05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce-
dure
08 Setting
mode
System User
interface
9163 Default setting of
printing direction
for Time Stamp and
Page Number
0 0-1 SYS 0: Short edge
1:Longedge
1
08 Setting
Mode
System User
interface
Paper Feed Auto-start setting
for MPT printing
9164 Remote 0 0-1 SYS Sets whether or not feeding a paper automatically into
the copier when it is placed on the bypass tray.
0: OFF (Press the [START] button to start feeding.)
1: ON (Automatic feeding)
1
08 Setting
mode
System User
interface
Paper Feed Auto-start setting
for MPT printing
9165 Local 1 0-1 SYS Sets whether or not feeding a paper automatically into
the copier when it is placed on the bypass tray.
0: OFF (Press the [START] button to start feeding.)
1: ON (Automatic feeding)
1
08 Setting
mode
System User
interface
Twin color copy 9178 Color 1 (The color
judged as black)
0 0-6 SYS 0:K1:Y2:M3:C4:R5:G6:B 1
08 Setting
mode
System User
interface
Twin color copy 9179 Color 2 (The color
judged as other than
black)
4 0-6 SYS 0:K1:Y2:M3:C4:R5:G6:B 1
08 Setting
Mode
System Option FAX 9183 Application of paper
source
0 0-1 SYS 0: Not subjected for APS judgment
1: Subjected for APS judgment
1
08 Setting
mode
System User
interface
9184 Centering printing of
primary/secondary
direction at AMS
1 0-1 SYS 0: Invalid
1:Valid
1
08 Setting
mode
System User
interface
Feeding paper media 9185 0 Copier 17 1,17 SYS Sets a media type for APS Tray searching in the copier
functions.
Acceptablevalue(decimalnumber):1,17
Each bit 0: Excluded from feeding target media
Each bit 1: Feeding target media
bit 0: Plain paper
bit 1: N/A (Always set "0")
bit 2: N/A (Always set "0")
bit 3: N/A (Always set "0")
bit 4: Plain(Thin)
* Do not set the paper type that is not supported.
4
08 Setting
mode
System User
interface
Feeding paper media 9185 1 Printer/Box 1 1 SYS Sets a media type to print on plain paper in the printer/
box functions. This setting is used for Tray searching or
media type inconsistency judgment. The setting result
doesnotaffectothermediatypes,otherthanplainpaper.
Acceptable value (decimal number): 1 only
Each bit 0: Excluded from feeding target media
Each bit 1: Feeding target media
bit 0: Plain paper
bit 1: N/A (Always set "0")
bit 2: N/A (Always set "0")
bit 3: N/A (Always set "0")
bit 4: N/A (Always set "0")
4