Omega DP41-B - Lockout Menu (LOCk)

30
Lockout (Access Security) Configuration Menu
100
LOCk
Press ‘RESET/ENTER’ 8) Display shows "StOREd" stored message momentarily and then
advances to the "LOCk" Lockout menu.
Press ‘RESET/ENTER’ 9) Display shows "SP1" Setpoint 1 submenu. If necessary, use ‘MENU’
button to regain accessibility or lockout the other following menu functions
in the Main Menu: "SP2", "SP3", "SP4", "INPUt", "RdG.CNF", "INP.CNF",
"MP.SC.OF", "OUt.CNF", "SP.CNF", "AL.CNF", "COMM" (If
Communication
Option Board installed), and "COLOR".
Press ‘RESET/ENTER’ 10) Display flashes "dISAbL" disable option or previous setting.
Press ‘䊱/MAX’ 11) Scroll and select "ENAbLE" to lockout "SP1" Setpoint 1 from any
unauthorized modification or skip this menu, just Press ‘RESET/ENTER’.
Press ‘RESET/ENTER’ 12) Display shows "StOREd" stored message momentarily and then
advances to the "SP2" submenu that allows user to lockout or regain
access controlling Setpoint 2 level.
• To lockout these following sequential submenus, refer to the
above steps. These menus have the identical setup
procedure and items as submenu "SP1" Setpoint 1:
"SP2": Setpoint 2
"SP3": Setpoint 3
"SP4": Setpoint 4
"INPUt": Input Selection
"RdG.CNF": Reading Configuration
"INP.CNF": Input Configuration
"MP.SC.OF": Multi Scale & Offset
"OUt.CNF": Output Configuration
"SP.CNF": Setpoint Configuration
"AL.CNF": Alarm Configuration
"COMM": Communication Configuration
"COLOR": Color Selection.