33
Specifications
110
TURNDOWN RATIO
(MAX OFFSET-MIN SPAN): 1000 with 0.1% or 100 with 0.01% resolution
NETWORK AND COMMUNICATIONS,OPTIONAL:
ETHERNET: Standards Compliance IEEE 802.3 10Base-T
SUPPORTED PROTOCOLS: TCP/IP, ARP, HTTPGET, TELNET
RS-232 / RS-422 / RS-485 / Selectable from menu; both ASCII and modbus
MODBUS: protocol selectable from menu. Programmable 300
to 19.2 K baud; complete programmable setup
capability; program to transmit current display,
alarm status, min/max, actual measure input value
and status.
RS-485
(HALF AND FULL DUPLEX): Addressable from 0 to 199
ISOLATION
POWER
90 to 240 Vac (115 to 340 Vdc, DC equivalent)
50/60 Hz
8.5 watts, max
IEC127-2/III, 250 mA (Time-Lag) or UL Slow-Blow
10 to 32 Vdc
8 watts, max
See Approvals Section
LINE VOLTAGE/POWER
VOLTAGES:
FREQUENCY:
POWER:
EXTERNAL FUSE
PROTECTION REQUIRED:
LOW VOLTAGE/POWER OPTION
VOLTAGES:
POWER:
EXTERNAL FUSE
PROTECTION REQUIRED:
IEC127-2/III, 1 to 1.25 A (Time-Lag) or UL Slow-Blow
External power source must meet Safety Agency Approvals.
ENVIRONMENTAL
OPERATING TEMP RANGE: 0 to 50 ºC (32 to 122°F)
STORAGE TEMP RANGE: –40 to 85 ºC (–40 to 185°F)
HUMIDITY: up to 95% non-condensing at 40°C (104°F)
FRONT PANEL: NEMA-4 rated
MECHANICAL
DIMENSIONS (H x W x D): 1.89 x 3.78 x 5.86in. (48 x 96 x 145mm)
PANEL CUTOUT (H x W): 1/8 DIN 1.772 X 3.622in. (45 x 92mm)
WEIGHT: 1.2 pounds (448 g)
MATERIAL: 94V-0 UL-rated Polycarbonate
APPROVALS
See Approvals Section.
To Next Page
Loading...
