Omron CP1L - Page 78

44
Specifications Section 2-2
Power consumption 50 VA max. (CP1L-M@DR-A)
50 VA max. (CP1L-M@DT-A)
30 VA max. (CP1L-L@DR-A)
30 VA max. (CP1L-L@DT-A)
30 VA max. (CP1L-J@DR-A)
See note 3.
20 W max. (CP1L-M@DR-D)
20 W max. (CP1L-M@DT@-D)
13 W max. (CP1L-L@DR-D)
13 W max. (CP1L-L@DT@-D)
13 W max. (CP1L-J@DT@-D)
Inrush current
(See note 1.)
100 to 120 VAC inputs:
20 A max.(for cold start at room
temperature.)
8 ms max.
200 to 240 VAC inputs:
40 A max.(for cold start at room
temperature.)
8 ms max.
30 A max.(for cold start.)
20 ms max.
External power supply (See note 2.) 300 mA at 24 VDC (CP1L-M@DR-A)
300 mA at 24 VDC (CP1L-M@DT-A)
200 mA at 24 VDC (CP1L-L@DR-A)
200 mA at 24 VDC (CP1L-L@DT-A)
None
Insulation resistance 20 MΩ min. (at 500 VDC) between the
external AC terminals and GR terminals
No insulation between primary and sec-
ondary DC power supplies.
Dielectric strength 2,300 VAC 50/60 Hz for 1 min between
the external AC and GR terminals, leak-
age current: 5 mA max.
No insulation between primary and sec-
ondary DC power supplies.
Noise resistance Conforms to IEC 61000-4-4 2 kV (power supply line)
Vibration resistance
10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s
2
in X, Y, and
Z directions for 80 minutes each (time coefficient of 8 minutes × coefficient factor
of 10 = total time of 80 minutes)
Shock resistance
147 m/s
2
three times each in X, Y, and Z directions
Ambient operating 0 to 55°C
Ambient humidity 10% to 90% (with no condensation)
Atmosphere No corrosive gas.
Ambient storage −20 to 75°C (excluding battery)
Terminal screw size M3
Power interrupt time 10 ms min. 2 ms min.
Weight CP1L-M60D@-@: 820g max.
CP1L-M40D@-@: 675 g max.
CP1L-M30D@-@: 610 g max.
CP1L-L20D@-@: 380 g max.
CP1L-L14D@-@: 380 g max.
CP1L-L10D@-@: 300 g max.
CP1L-J20D@-@: 380 g max.
CP1L-J14D@-@: 380 g max.
Power supply AC power supply DC power supply
Model
numbers
60 I/O points CP1L-M60DR-A,
CP1L-M60DT-A
CP1L-M60DR-D, CP1L-M60DT-D, or
CP1L-M60DT1-D
40 I/O points CP1L-M40DR-A,
CP1L-M40DT-A
CP1L-M40DR-D, CP1L-M40DT-D, or
CP1L-M40DT1-D
30 I/O points CP1L-M30DR-A,
CP1L-M30DT-A
CP1L-M30DR-D, CP1L-M30DT-D, or
CP1L-M30DT1-D
20 I/O points CP1L-L20DR-A,
CP1L-L20DT-A,
or CP1L-J20DR-A
CP1L-L20DR-D, CP1L-L20DT-D,
CP1L-L20DT1-D, CP1L-J20DR-D, or
CP1L-J20DT1-D
14 I/O points CP1L-L14DR-A,
CP1L-L14DT-A,
or CP1L-J14DR-A,
CP1L-L14DR-D, CP1L-L14DT-D,
CP1L-L14DT1-D, CP1L-J14DR-D, or
CP1L-J14DT1-D
10 I/O points CP1L-L10DR-A,
CP1L-L10DT-A
CP1L-L10DR-D, CP1L-L10DT-D, or
CP1L-L10DT1-D